6
EN
Using the appliance
B
5
- A water inlet hose (in the drum or already
installed)
- A cold water inlet hose
6 A U-bend (in the drum or already installed)
7 A lower hatch cover (depending on the model)
Before using the washing machine, be sure to remove the transit bolts used to protect the
machine during transportation!
IMPORTANT: failure to remove the transit bolts may
damage the machine.
1. Partially unscrew all the transit bolts (by about 30 mm) in the direction of the arrow using
the spanner (do not fully unscrew them).
30
To Next Page
Loading...
