Valco baby EZ Rider User Manual

Thank you for purchasing a quality VEE BEE
product. Please read and follow the instructions
outlined in this guide carefully. Familiarise yourself
with the construction and safety features; be sure
that you understand all the warnings and safety
guidelines before use.
Important: Please read the following
instructions carefully before assembling this
product. Retain this guide in a safe place for
future reference. Please refer to your pram
or pusher’s manufacturer’s instructions to
ascertain the suitability of using the EZ Rider
with your model. Some prams and strollers are
not suited to bearing additional loads and use
of the EZ Rider may void your pram or stroller’s
warranty.
PRODUCT
REFERENCE GUIDE
© Copyright VE 2012
vs290512
Due to our policy of continuous product
development, this product is constantly evolving.
It is possible that some features or procedures
outlined here have changed since this document
was written. If you are unsure of any procedure
shown here, please contact us via the web at
info@valco.com.au to obtain the most up to date
information before use. Include the batch number,
which can be found on a sticker on the frame.
All pictures and diagrams herein are provided for
illustration purposes only.
Actual product, colour or fabric may vary.
VEE BEE reserves the right to modify or alter any
specication or colour without notice or obligation
to modify any product previously purchased
FURTHER INFORMATION
In Australia/New Zealand
veebee.com.au
EZrider
Ride on seat & Board

Valco baby EZ Rider Specifications

General

Product Name	Valco baby EZ Rider
Category	Stroller
Stroller Weight	24 lbs
Weight	24 lbs
Harness Type	5-Point Harness
Harness	5-Point
Wheels	4
Recline Positions	Multiple
Recline	Adjustable
Storage Basket	Large

Summary

Foot Board Assembly

Board Assembly

Steps for assembling the main foot board using bolts and nuts.

Attaching the Coupling Adaptors

How to connect adaptor types to the coupling arm for pram attachment.

Attach Coupling Unit to Pram

Connecting the coupling unit to the pram, adjusting for width.

Attach L-Bar

Securing the L-bar to the coupling unit and foot board.

Attach L-Bar Continued

Finalizing L-bar attachment for correct board height and parallelism.

Coupling Straps

Using additional straps for an extra secure connection to your pram.

Storage Strap

How to use the storage strap to stow the EZ Rider when not in use.

Attach Seat

Mounting the seat onto the foot board for storage.

General Warnings and Safety Information

Safety Precautions and Usage Guidelines

Essential safety rules, usage limitations, and maintenance advice.