V33070-CL
VTM-99-008
10
EPOXY POLYAMIDE PAINT
EPOXY/FIBREGLASS
350 LBS (158 KG)
2. DO NOT USE LEAD BASE PAINT TO TOUCH-UP OR REPAINT ANTENNA.
INTERNET: www.valcom-guelph.com EMAIL: enquiries@valcom-guelph.com
P.O. BOX 603 GUELPH, ONTARIO, CANADA, N1H 6L3
QUICK REFERENCE DATA
WEIGHT
NOTES:
TEL 519-824-3220 FAX 519-824-3411
MECHANICAL CHARACTERISTICS
BASE INSULATOR
WIND LOADING TEST
TOP TERMINATION
TEMPERATURE
MECHANICAL LENGTH
JOINTS
FINISH
ELECTRICAL CHARACTERISTICS
V33070-CL2 SERIES
.75 INCH (1.87 CM) AT 100 MPH (160 Km/Hr)
-60°F TO 150°F (-50°C TO 65°C)
VALCOSPHERE
74.8 FT (22.8 M)
BRONZE FERRULE C/W LOCKING PIN
FREQUENCY RANGE
RESONANT FREQUENCY
POWER RATING
DRY WITHSTANDING VOLTAGE
ELECTRICAL LENGTH
100 KHz to 30 MHz-WITH TUNER
100 KHz TO 2 MHz-SPECIFIED BY CUSTOMER
2 KW BELOW 1.5 MHz, 5 KW ABOVE 1.5 MHz
30 KV
VARIES WITH LOADING SECTION
V33070-CL2 V33070-FT-CL2
CENTRE OF GRAVITY
ABRASION RESISTANCE
ICE LOADING TEST TO 150 MPH (240 Km/Hr)
GOOD
25 FT (7.6 M) 24 FT (7.3 M)
360 LBS (162 KG)
(44.45 CM)
17.50 IN
2.13 IN TYP
(5.4 CM)
12 HOLES .718 (1.82 CM) DIA
EQUASPACED ON A
DIA BOLT CIRCLE
SIDE FEED
(45.7 CM)
18 IN
14.625 (37.14 CM)
22.9 CM
5.0 IN
12.7 CM
74.8 FT (22.8 M)
FEED-THROUGH
9.0 IN
VALCOSPHERE
17.4 FT (5.3 M) 18.3 FT (5.6 M)
18.6 FT (5.7 M)
17.8 FT (5.4 M)
76.0 FT (23.2 M)
3. UNITED STATES PATENT NUMBERS 3,725,944 AND 4,500,888 APPLY.
STANDARDOPTIONAL
1. THE ADVANTAGE OF THE CENTRE LOADING COIL IN SECTION TWO IS TO PROVIDE REDUCED
RESONANCE OVER A STRAIGHT VERTICAL WHIP, THEREFORE REDUCING BASE FEED VOLTAGE
AND PROVIDING A GREATER POWER HANDLING CAPABILITY.
SECTION 1 SECTION 2 SECTION 3 SECTION 4
To Previous Page
Loading...