Need help?Do you have a question about the Valentine One V1 Gen2 and is the answer not in the manual?
General| Radar Detection | Yes |
|---|---|
| Laser Detection | Yes |
| Arrow Display | Yes |
| Bogey Counter | Yes |
| GPS | No |
| Bluetooth | Yes |
| Voice Alerts | Yes |
| Auto Mute | Yes |
| Power Source | 12V DC |
| Frequency Bands | X, K, Ka |
| Display | OLED |
Details the radar bands covered by the Valentine One Gen2.
Details the laser detection capabilities of the Valentine One Gen2.
Explains how the Valentine One Gen2 indicates the location of radar and laser sources.
Describes the Bogey Counter's function for tracking multiple threats.
Details the various buttons, indicators, and sensors on the Valentine One Gen2.
Provides instructions for properly mounting the Valentine One Gen2 unit.
Alerts users to potential hazards when mounting the detector.
Explains how to connect the device to a 12V power source.
Instructions for connecting headphones to the device for audio alerts.
Guide on adjusting the device's audio volume for muted alerts.
Explains what the different indicators and information on the display mean.
Details how to configure the device's different detection modes.
Instructions for downloading and installing the V1connection app.
Guide on pairing the Valentine One Gen2 with a smartphone via Bluetooth.
Information and illustration of the Lighter Adapter accessory.
Step-by-step guide for installing the direct-wire power adapter.
Guide for installing the Concealed Display with the Lighter Adapter.
Instructions for mounting the Concealed Display using the mounting plate.
Guide for installing the SAVVY module using the OBD port.
Describes the initial startup sequence for the SAVVY module.
Explains how to adjust SAVVY settings for speed-dependent muting.
Explains the principles behind how traffic radar guns operate.
Describes the basic function of radar detectors and the V1 Gen2's sensitivity.
Explains the Instant-on radar mode and how to defend against it.
Explains common causes of false alarms from various bands.
Provides clues for identifying false alerts caused by other radar detectors.
General advice on how to interpret radar alerts for effective defense.
Provides examples of common driving scenarios and their corresponding V1 Gen2 alerts.
Describes radar alerts when approaching a vehicle from behind.
Details alerts in metro areas with multiple signals like alarms and door sensors.
Explains alerts when encountering Instant-on radar on the highway.
Describes alerts for distant Instant-on radar targeting traffic ahead.
Instructions for optimal mounting of the V1 Gen2 for laser detection.
Explains the audio and visual cues for a laser alert.
Details how traffic laser guns measure speed using infrared light.
Explains the function and sensitivity of laser detectors.
Describes how laser traps are set up and how the V1 Gen2 detects them.
Identifies sources of false laser alerts and their solutions.
Guides users through diagnosing and fixing a completely unresponsive device.
Provides steps to troubleshoot a dead Concealed Display.
Addresses issues with directional arrow accuracy and front detection.
Helps users resolve concerns about the device's performance and accuracy.
Outlines the process for sending the device in for repair.
Provides the shipping address for warranty service.
Information on how to obtain software and firmware upgrades for the device.
Lists the technical specifications of the Valentine One Gen2.
Lists optional defense gear accessories like SAVVY and Concealed Display.
Lists available replacement parts and accessories for the device.
Details the terms and conditions of the product's warranty.
Important terms governing the use of the product and its app.
Compliance statements and regulatory information for FCC and CE standards.
Key points and advice for users regarding product usage and laws.
To Next Page
