Valeton CORAL Series - Controls and Operation; MIX Knob; DEPTH;FB Knob; TIME Knob

A / B: Select effect groups:
green LED – Group A,
red LED – Group B
FOOTSWITCH:
Turn the pedal on/off
HOLD: Engage/disengage Tap
Tempo function (the LED will
pulse to indicate current effect
speed when Tap Tempo is on)
TAP: Set the tap tempo speed in
Tap Tempo mode
HOLD WHILE POWERING UP:
Turn on/off delay trail (the LED
will pulse 4 times to indicate the
change)
CONTROLS
MIX: Controls the mix level between
dry/wet signal (depending on effects)
DEPTH/FB: Controls the effect
depth/feedback amount (depending
on effects)
TIME: Controls the effect speed/delay
time (depending on effects)
X/Y: Controls detailed effect character
(depending on effects)
TYPE: Selects effect type (the LED
will flash quickly when switched to a
different effect type)