Valeton CP-200 - Footswitch Customization

Footswitch
Patch Stomp User
FS 1 FS 2 FS 3 FS 4
FS 5 FS 6 FS 7 FS 8
Tap
Hold
Tap
Hold
BANK- BANK+ TAP
BANK- BANK+ TUNER
None None None
LOOPER
None
Single FSPage
There are 3 footswitch modes: Patch mode, Stomp mode and
User mode. In each mode, all options are the same with varied
default settings. All functions will work immediately when
selected and presented. All changes will be saved
automatically.
You can also click PARA to enter Footswitch Setting, and
assign tap and hold functions for each footswitch. By fast-
selecting which footswitch to assign functions, tap the
corresponding footswitch.
Ÿ Turn Quick Access Knob 1 to select tap functions
Ÿ Turn Quick Access Knob 2 to select hold functions
Ÿ Turn Quick Access Knob 3 to turn pages between single FS
and dual FS settings.
Footswitch
Stomp User
FS 1 FS 2 FS 3 FS 4
FS 5 FS 6 FS 7 FS 8
Tap
Hold
Tap
Hold
BANK- BANK+ TAP
BANK- BANK+ TUNER
None None None
LOOPER
None
Single FSPageBANK-HoldBANK-Tap
Patch
We have a reset option in every mode to perform a factory
reset for all footswitches.
Footswitch
Stomp User
FS 5 FS 6 FS 7 FS 8
Tap
Hold
None None NoneNone
Reset
Patch
FS1+5 FS5+6 FS6+7 FS7+8
Reset
None None NoneNone
11
Footswitch
This is for choosing footswitch modes and corresponding function settings.
Display Auto CAB Match
GLOBALSETTINGS
USB Audio
EXP Calibrate
Footswitch
Input/Output
EXP 2/Footswitch
BankSel
Mode
Wait Setting
Ÿ Quick Access Knob 1 is to choose Bank Select Mode. This
setting simultaneously aect internal and external
footswitches and oers two modes: Initial and Wait.
◦ Initial: When switching banks, the patches will roll
immediately.
◦ Wait: The default mode. When switching banks, the
patches will NOT roll immediately, instead, you will need
to enable footswitch functions and select a confirmed
patch number. After that, the patches will change.
Ÿ Quick Access Knob 2 is to enter Footswitch Setting (See
picture below).
Global Settings