Valeton CP-200 - MIDI Connectivity and Control

Display Auto CAB Match
GLOBALSETTINGS
USB Audio
EXP Calibrate
Footswitch
Input/Output
EXP 2/Footswitch
EXP
Mode
Mode
Dual FS
FS9Tap
None
FS10Tap
None
Display Auto CAB Match
GLOBALSETTINGS
USB Audio
EXP Calibrate
Footswitch
Input/Output
EXP 2/Footswitch
MIDI In
Source
Mixed
Input Ch(DIN) Input Ch(USB)
Omni Omni
MIDI
13
EXP 2 / Footswitch
This menu is to adjust parameters related to external devices
through EXP/FS input.
You need to set up for the type of the external devices. If it is an
external pedal, it is called EXP 2, and you’ll need to manage the
parameters in “Patch Settings – EXP Settings”; if it is a single
footswitch or dual footswitch, the options in the Quick Access
menu will help you set up.
This menu is to set up MIDI messages, including MIDI In Source, Input Channel (DIN), Input Channel (USB), Output
Channel (DIN), Output Channel (USB), Clock Source, Clock Out (DIN) and Clock Out (USB).
MIDI In Source: Control where the MIDI message is coming from.
Input Channel (DIN), Input Channel (USB), Output Channel (DIN),
Output Channel (USB): For setting up the channel of the USB
input and the MIDI messages' input and output
Clock Source: For choosing the source of the MIDI clock.
Clock Out (DIN), Clock Out (USB): To control whether the MIDI
OUT and USB will send out MIDI clock messages. Use this to set
your GP-200 as the main clock for all MIDI devices.
Parameters
Range
Description
MIDI In Source
DIN Only
Only receiving MIDI messages from the MIDI IN.
USB Only
Only receiving MIDI messages from the USB.
Mixed
Receiving from both the MIDI IN and the USB.
Input Channel (DIN)
Omni ~ 1 ~ 16
(The default
setting is
Omni)
For setting up the channel of the USB input and the MIDI messages’ input and
output
Input Channel (USB)
Output Channel (DIN)
Output Channel (USB)
Clock Source
Internal
Only receiving from the internal clock
DIN Only
Only receiving the clock messages from the MIDI IN
When “Din Only” , “USB
Only” or "External" is
selected, the internal clock
will not work and the Tap
Tempo will not function
USB Only
Only receiving the clock messages from the USB
External
Only receiving from the external clock
Mixed
(Default)
Receiving clock messages from the internal clock, MIDI In and USB. If using
dierent clock sources simultaneously, then the last message type the GP-200
receives will cover previous ones
Clock Out (DIN)
ON/OFF
(The default
is OFF)
When turned ON, this unit will negate all input signals; Additionally, when your
Clock Source is set to “DIN Only” or “USB Only”, this unit will not send out MIDI
clock messages.
Clock Out (USB)
Global Settings