Valeton CP-200 - Application Scenarios; Full-Range Speaker Connections; Guitar Amp Input Jack Connection

Application Scenarios
17
With full-range speaker devices
Full-range devices include audio interface, studio monitor, PA system, headphones etc. In this scenario, the output jack or
headphone jack of the GP-200 can be connected according to the need of the back-end interface. The balanced and
unbalanced output signals are the same, and the balanced output is more suitable for long-distance signal transmission.
If there is only one speaker, please select the L (MONO) first.
To get the best tonal performance, keep the AMP and CAB modules on and keep the "No CAB" mode o.
In this section, we will introduce the connection methods of GP-200 in common usage scenarios.
With guitar amps (INPUT jack)
In this scenario, directly connect the GP-200's unbalanced output connector to the guitar amp's input connector.
If only one amp is available, please select the L (MONO) first.
To get the best tonal performance, keep the AMP and CAB modules o to avoid adverse eects on the tone.