Valeton GP-200R - Software; Suggested Setups; Using with Your Instrument; And Amp

To Next Page

To Previous Page

SOFTWARE

Connect GP-100 to your computer and access the free software to manage your GP-100 device, adjust tonal

settings, transfer ﬁles, update ﬁrmware, restore settings, and upload third party IR ﬁles. GP-100 software is

compatible with Windows and macOS platforms. Visit www.valeton.net/support to download the software for

free.

Suggested Setups

Using with your instrument and amp

Here are some common setups to get the most out of GP-100.

Plug your instrument into the GP-100 instrument INPUT jack, and run a cable (or two) from the OUTPUT(s) to

your ampliﬁer(s). If you have one amp, run the cable from the left output.

For best results, turn o the AMP and CAB modules on GP-100.