13
Troubleshooting
Troubleshooting
Device won’t boot
• Please conrm whether the power interface is in good contact.
• Please conrm that the correct power supply is used.
No sound or low volume
• Please conrm that the input and output cables are connected correctly.
• Please conrm whether the connecting cables and each interface are in good contact.
• Please make sure that the volume knobs of LOOP 1, LOOP 2 and drum machine are in
proper positions.
• Please conrm whether the audio device you connected is in mute state.
Obvious noise
• Please conrm that the connecting cables are in good contact.
• Please conrm whether the instrument output jack is working normally.
Recording/Saving problem
• Please pay attention to whether the storage space exceeds the maximum limit of a
single track (4min).
About Drum SYNC
• When replaying recorded LOOP les and drum machines, please try to play or switch
sections at the exact beat.
• Changing the drum tempo (BPM) of a project after the recording is nished will disable
the SYNC function.
To Next Page
Loading...