Mar2018 Revision - 7 -
5) Remove the legs from the
parts box. Each leg should
have a leveler installed (if not,
install it at this time).
Make sure each leg leveler is
adjusted to its highest
position and screwed “all the
way in”.
6) While the Lower Cabinet is
still in the upright position,
install the two front legs using
two 5/8” leg bolts per leg.
The leg bolts can be found at
the corners of the Lower
Cabinet. Remove them,
install the legs, reinstall and
fully tighten the bolts.
7) Rotate the Lower Cabinet
into position; use the box top
as a pad to prevent
scratching back of the
cabinet…
To Next Page
Loading...