What to do if the Valloy Incorporation DUOBLADE F shows a network error?
If the Valloy Incorporation Cutter displays a network error, it indicates a communication issue between your PC and the machine. First, check the data cable and ensure it is securely plugged in. Then, verify that both the PC port and software port are correctly set up.
Why Valloy Incorporation DUOBLADE F Cutter shows self-checking fail?
A self-checking fail on the Valloy Incorporation Cutter indicates a communication error between the panel and the motherboard. Turn off the power and restart the device. If the error persists, further assistance is needed.
What to do if Valloy Incorporation DUOBLADE F Cutter is resetting?
If the Valloy Incorporation Cutter is resetting, it is due to a reset sensor failure. The reset sensor is located at the end of the head scanning line. Check if the sensor is properly fixed. If not, further assistance is needed.
General| Brand | Valloy Incorporation |
|---|---|
| Model | DUOBLADE F |
| Category | Cutter |
| Language | English |
General guidelines for safe operation, including operator training and emergency stop awareness.
Precautions regarding power supply, circuit breakers, and ground connection.
Guidelines for safe installation, including ventilation, lifting, and protective gear.
Safety measures during machine operation, prohibiting untrained personnel and hand insertion.
Safety measures for maintenance, including power off, authorized technicians, and lubrication.
Instructions for safely handling the machine crates using forklifts.
Procedures for packing and unpacking the machine for transport.
Recommended temperature and humidity for storing the machine.
How to move the machine on wheels or with a forklift on uneven ground.
Dimensions required for machine installation.
Voltage and frequency requirements for the machine.
Step-by-step guide for installing the machine on a stable surface.
Instructions for disassembling the machine.
Lists the items included in the machine package.
Technical specifications and parameters of the DuoBlade F machine.
Instructions for installing and calibrating the mark sensor for accurate cutting.
Step-by-step guide on how to replace the cutting blade.
Instructions on how to adjust the blade protrusion for proper cutting depth.
How to sort and place material sheets correctly on the machine.
Steps to prepare for die cutting, focusing on the black mark sensor.
Details on using the machine's control panel buttons and parameters.
Explanation of X Vert and Y Vert parameters for adjusting image angles.
Explanation of X Scale and Y Scale parameters for adjusting image size.
Explanation of X Cut Ad and Y Cut Ad parameters for image positioning.
Explanation of the Rotary Rad (Turn Radius) parameter for corner cutting.
Explanation of speed and acceleration parameters for cutting quality.
Setting up network connection for data transfer between PC and machine.
Configuring network port, machine ID, and PC IP address for communication.
How to operate the machine with single or double cutting heads.
Advanced features for controlling cutting quality, adjusting corners and paths.
Setting Arc Com parameter for round corners in trajectory optimization.
Setting Cor Com parameter for right corners in trajectory optimization.
Setting parameters for labels with both round and right corners.
Setting Up Com parameter to cut longer until the head raises up.
General procedures and recommendations for cleaning and maintaining the machine.
Common error messages, their issues, and solutions.
Frequently asked questions and their answers regarding machine operation.
To Next Page