35mm Holder
The 35mm Holder is intended for scanning standard 135 (35mm), both
full (standard) frames of 24x36mm and half frame of 24x18mm. The
Holder can both be used on its own or in conjunction with the Film
Advancer (sold separately) for added functionality and higher quality
scanning. For scanning frames smaller than full frame 35mm, an optional
mask can help mask off stray light (sold separately) and can help improve
results, particularly on lenses prone to aring.
The 126 format lm will also t into the gate but using the holder for that
format is not recommended as the holder can scratch the image area on 126
lm and parts of the image could be hidden when scanning. A dedicated 126
Holder compatible with the system is available - see our website.
To Next Page
Loading...