Holders
When used as a stand-alone unit we recommend attaching the included
rubber dome feet as indicated in the picture below. Other than that, no
assembly is necessary. If you wish to use the Holders with the Advancer,
the rubber dome feet must be removed. Doing so does not require any
tools and does not risk damage to the Holders.
Repeatedly changing conguration between stand-alone
use and use with the Advancer is not recommended as
removing and reattaching the rubber dome feet repeatedly will make
them lose stickiness. Replacement feet are available from VALOI upon
request - please email hello@valoi.co.
To Next Page
Loading...