Valor Plus

SET TIMER
SET THE TIMER
You can program two heat cycles for di erent times in
the day. Both cycles, P1 and, have a start and
an end time. Cycles cannot overlap. Before you set
the timer, set the temperature.
Click SET button until TIMER appears.
Press SET button until time
6:00
 ashes. P1 
 appears.
To set the hour, press high  a m e
button. To set the ,
press low  ame button.
Click SET button so P1 
appears. Then, select time.
Click SET button so  
appears. Then, select time.
Click SET button so  
appears. Then, select time.
Press to save temperature
settings, or wait a few seconds.
Only want one heat cycle?
Set the time for these three:
P1  and .