Method 1 & 2
Method 3
VL100
VL
100
Flip the device so that bottom is facing up.
Power off the device before plugging in
your connection type.
Ethernet: Labeled as LAN. Power down,
plug in your Ethernet cable,power back on
and tap the connection icon on the home
screen.
Dial: Labeled with a Phone Icon. Power
down and plug in the phone line. Power
back on and when prompted for WiFi,
press cancel. When prompted For the Dial
setting select cancel to be brought to your
home screen to begin transacting.
Power on the device, Select "yes
,
Connect" for Wifi, Select your SSID, Enter
password and select the Green Ok
Button. If you’re on another connection
type and want to switch to Wifi, Tap the
Connection Icon on the top of the touch
screen and select WiFi. If this is your first
time connecting, follow the instructions
above. Otherwise, you will connect
automatically.
Connect Your Device to the Internet