Rev. 5
8-14
SERVICE SCHEDULE PROCEDURES
BATTERY TERMINAL CLEANING
â–² WARNING: NEUTRALIZE BATTERY CORROSION WITH WATER/BAKING SODA MIX.
Owner and SPC, LSA-RM, or
A&P
1. Remove the battery from the aircraft. (8-5)
2. Clean and score both battery and wire terminals with a scouring pad or
equivalent.
3. Re-install the battery.
BATTERY RECHARGE
Owner and SPC, LSA-RM, or A&P
Odyssey owner manual
Battery charger owner manual
1. Remove the battery from the aircraft. (8-5)
2. Connect the battery charger per the battery charger manufacturer instructions.
3. Charge the battery per the battery manufacturer instructions.
TERMINAL TAB CLEANING
Owner and SPC, LSA-RM, or A&P
1. Remove the wings from the fuselage. (5-13)
2. Remove dirt, carbon and corrosion from all of the terminal tabs on both sides of
the fuse and both wings using a scouring pad.
To Next Page
Loading...
Need help?
General
