Rev. 5
3-4
3. Perform visual inspection for and make note of any oil, exhaust, fuel, hydraulic or
reother leaks.
4. Thoroughly clean engine, fuselage, cockpit, undercarriage and other areas as
needed to allow thorough inspection.
5. Throughout the inspection check for cracks, signs of fatigue, corrosion, wear,
deformation, and/or failure. Always check condition and security of all safe-
tied fasteners.
Figure 4: Remove for inspection
Upper Forward Fuselage
Skin
Baggage Bulkhead Corrugation
Fuel Tank Assembly (see chapter 13 for
draining the fuel tank)
* - Not numbered in order of removal