Need help?Do you have a question about the Vanair RC40 and is the answer not in the manual?
General| Air Delivery | 40 CFM |
|---|---|
| Pressure | 175 PSI |
| Air Compressor Type | Rotary Screw |
| CFM at 100 PSI | 40 CFM |
| Max Pressure | 175 PSI |
| Dimensions | 30" W |
Details specific hazards, warnings, and cautionary notes for safe operation.
Summarizes critical safety information including dangers, warnings, and cautions.
Details the various components of the RC40 compressor unit.
Guides on inspecting the machine package upon receipt to ensure no damage.
Outlines criteria and considerations for selecting an appropriate mounting location for the unit.
Details the procedure for connecting the electrical supply to the compressor unit.
Specifies the necessary hydraulic system requirements for proper compressor installation.
Provides instructions for connecting the hydraulic supply and return lines.
Guides on connecting the air supply to the compressor system.
Details the installation procedure for the air reservoir tank.
Describes the recommended operating conditions for the RC40 compressor.
Provides step-by-step instructions for the initial start-up of the compressor.
Details the procedures for shutting down the compressor, both initially and routinely.
Outlines the steps for starting the compressor during normal operation.
Presents a schedule for routine maintenance tasks based on usage intervals.
Covers procedures for replacing parts and making necessary adjustments.
Details procedures for parts replacement and adjustments.
Explains how to remove panels to gain access for maintenance.
Details the steps for opening and closing the roof panel for access.
Provides instructions for removing and replacing side panels for maintenance access.
Guides on adjusting or replacing the drive belts for proper tension.
Covers procedures for aligning drive sheaves and pulleys.
Details the steps for safely disassembling the compressor.
Offers a guide to identify and resolve common malfunctions and faults.
To Next Page
