To Next PageTo Next Page
Need help?Do you have a question about the Vanair Reliant RS45 and is the answer not in the manual?
General| Model | Reliant RS45 |
|---|---|
| Type | Rotary Screw Compressor |
| Air Delivery | 45 cfm |
| Max Pressure | 150 PSI |
| Engine | Kubota D902 |
| Engine Power | 24.8 HP |
| Fuel | Diesel |
Overview of safety guidelines and operator responsibility.
Explains hazard alert systems and symbols used in the manual.
Importance and placement of safety decals on the equipment.
Procedure for inspecting the unit upon delivery for damage.
General guidance for locating and preparing the compressor for operation.
Criteria for selecting an appropriate mounting location for the compressor.
Introduction to the hydraulic system requirements and components.
Procedures and guidelines for physically installing the compressor unit.
Importance of proper machine placement for cooling and access.
Minimum clearance requirements for ventilation and service access.
Step-by-step instructions for pre-start checks of the hydraulic compressor.
Procedure for safely shutting down the compressor system.
Routine maintenance schedule based on time and/or logged hours.
Procedures for replacing components and making adjustments.
Overview of troubleshooting, common problems, and analysis.
Guide for diagnosing and correcting machine operation malfunctions.
Guide for diagnosing and correcting hydraulic system issues.
Procedure for ordering replacement parts, including necessary information.
