will lock.
7. To disarm the system, a user with arm/disarm rights should press the tick key on the keypad then
present their card.
If multiple doors should lock when the intruder panel is armed then each door must monitor the
alarm status.
If the intruder panel is not being monitored then only the door that is wired to control the intruder
panel will lock.
ACT365-ACU / ACT365-ACU2A / ACT365-ACUPoE – Installation Instructions Wiring
© Vanderbilt 2019 14 A-100521-c
15.03.2019
To Next Page
Loading...
