HOW TO USE:
1. Insert 1 AA battery (not included) into battery compartment by twisting the handle
from the “Lock” position to “Open.”
2. Separate the bristle head from the device and open the battery compartment
using the included screwdriver.
3. Insert the battery in alignment with the polarity symbols ( +/-) indicated on the
unit, and replace the latch and secure the screw before reattaching the bristle head
and returning it to the “Lock” position.
4. To use, rest the handle between your index and middle finger and press the “Power”
button to activate vibration.
5. Apply shampoo, conditioner, or just water to your hair and gently rub the soft,
rubber tips on your scalp.
6. Rinse hair and repeat as desired. Press the “Power” button to turn off the device
after use.
NOTE: Clean the device by wiping down the base and bristles periodically with a damp cloth.
Groove is shower safe, but do not submerge fully in water.
To Next Page
Loading...
Need help?
General