2
3
Using Pose
• Make sure Pose’s 1000mAh Li-polymer battery is
fully charged
• After switching the device on, place your finger on
the power symbol and the mirror will light up
• To adjust the brightness, keep your finger on the
power symbol until the mirror has reached the level
you would like
• Short press the power symbol to switch between
bright, warm and cool lighting
• To turn the light o, press the power symbol again
• A flickering light means that Pose has nearly lost
its charge
Specs
• LED Quantity: 72 pcs
• DC Voltage: 3.7V
• Power: 4.5W
• Time: Approximately 2.5 hours
Charging Pose
• Before charging Pose, make sure the device is
switched o
• First, connect the micro-USB cord to a 5V power
supply or to a computer
• When charging, the indicator will light up
• Once charged, the light will automatically turn o
• A full charge should last approximately 2.5 hours
To Next Page
Loading...
