2
Using Pose
• Make sure Pose’s 1000mAh Li-polymer battery is
fully charged
• After switching the device on, place your nger on the
power symbol and the mirror will light up
• To adjust the brightness, keep your nger on the power
symbol until the mirror has reached the level you would like
• To turn the light off, press the power symbol again
• A ickering light means that Pose has nearly lost its charge.
Specs
• LED Quantity: 36 pcs
• DC Voltage: 3.7V
• Power: 4.5W
• Time: Approximately 2.5 hours
To Next Page
Loading...
