Firmness backrest comfort seat
To adjust the backrest to a looser or tighter position:
1. Open the straps by loosening the Velcro.
2. Tighten the straps or loosen them.
3. Fasten the Velcro again.
Wheelchair carrier
To attach the wheelchair on the back of
the bike:
1. Place the wheelchair on the supports.
2. Wrap the belts around the tires and
then through the buckle. Next, tighten
the belts thoroughly.
Loosen the screws with an Allen key to
adjust the supports.
Loosen the screws with an Allen key to
remove the rack. When loosened, the
rods can be pulled out of the bike frame.
Transporting a walking frame is also possible. Please ask your dealer about the
possibilities.
To Next Page
Loading...
