Vantec 2+1 FireWire 800/400 PCIe Combo Host Card User Manual

Provides Two FireWire 800 (1394b) Ports And One FireWire 400
(1394a) 6-Pin Port
Enjoy Data Transfer Rates Of 100, 200, 400 and 800 Mbps
Built-In 4-Pin Power Connector (Adapter May Be Required)
Works With Various Types Of FireWire 800 & FireWire 400 Devices
Including External Hard Drives, DV Camcorder, Digital Camera,
CD-RW/DVD-ROM Drive And Other Audio/Video Devices
Supports Hot-Swapping & Plug And Play
The Vantec 2+1 FireWire 800/400 PCIe Combo Host Card is the easiest way to update any computer with FireWire ports. Once installed, this
host card will add two FireWire 800 ports and one FireWire 400 port (6-pin) allowing support of various types of FireWire products such as
external hard drives, DV camcorder, digital cameras and much more. Plug and play; no drivers are required! Make the right choice and
update your computer with the new Vantec 2+1 FireWire 800/400 PCIe Combo Host Card.
Model:
Ports:
Dimensions:
OS Support:
UGT-FW210
2 External FireWire 800 Port
1 External FireWire 400 Port (6-Pin)
120mm x 93mm x 22mm
Windows® 2000/XP/2003/Vista/7 (32/64 bit) Mac OS X 10.4+
Computer With Available PCIe Slot
Windows® 2000/XP/2003/Vista/7 (32/64 bit) Mac OS X 10.4+
Vantec 2+1 FireWire 800/400 PCIe Combo Host Card, User's Manual
Introduction:
Specifiactions:
System Requirement
Package Contents
Send us an e-mail at: inquiry@vantecusa.com
All Registered Trademarks Belong To Their Respective Companies Copyright © 2010 Vantec Thermal Technologies. All Rights Reserved.
www.vantecusa.com
2+1 FireWire 800/400
PCIe Combo Host Card
Combo Host Card

Vantec 2+1 FireWire 800/400 PCIe Combo Host Card Specifications

General

Interface	FireWire 800/400
Data Transfer Rate	800 Mbps (FireWire 800), 400 Mbps (FireWire 400)
Bus Type	PCIe
Ports	2 x FireWire 800, 1 x FireWire 400
Operating Systems Supported	Windows 10
Connector Type	FireWire 800, FireWire 400

Summary

Vantec 2+1 FireWire 800/400 PCIe Combo Host Card Features

Dual FireWire 800 and Single FireWire 400 Ports

Provides two FireWire 800 (1394b) ports and one FireWire 400 (1394a) 6-pin port.

High Data Transfer Rates

Supports data transfer rates of 100, 200, 400, and 800 Mbps.

Power Connector

Features a built-in 4-pin power connector, with an adapter potentially required.

Device Compatibility

Works with various FireWire 800 and 400 devices like external drives and cameras.

Plug and Play Support

Supports hot-swapping and plug-and-play functionality, requiring no drivers.

Introduction to the Host Card

Specifications

Model Number

The specific model identifier for the host card is UGT-FW210.

Port Configuration

Details the card's ports: 2 External FireWire 800 and 1 External FireWire 400 (6-Pin).

Physical Dimensions

Specifies the physical size of the host card as 120mm x 93mm x 22mm.

Supported Operating Systems

Lists compatibility with Windows (2000/XP/2003/Vista/7) and Mac OS X 10.4+.

System Requirements

Required Hardware

A computer must have an available PCIe slot for installation.

Supported Operating Systems

Compatibility with Windows 2000/XP/2003/Vista/7 (32/64 bit) and Mac OS X 10.4+.

Package Contents