Need help?Do you have a question about the Vapotherm Precision Flow Hi-VNI and is the answer not in the manual?
General| Oxygen Concentration | 21-100% |
|---|---|
| Patient Interface | Nasal Cannula |
| Power Requirements | 100-240V AC, 50/60Hz |
| Therapy | High-Velocity Nasal Insufflation (Hi-VNI) |
| Flow Rate | Up to 40 L/min |
| Indications | Respiratory distress, hypoxemia |
| Humidification | Integrated humidification |
| Gas Temperature | Approximately 37°C at the patient interface |
| Alarms | Power Failure |
| Display | LCD Screen |
| Intended Use | To provide heated and humidified respiratory gases to spontaneously breathing patients. |
| Humidification Details | Heated and humidified breathing gases |
Details intended use and situations where the device should not be used.
Explains warning, caution, and note symbols for safe operation.
Provides overall safety warnings, including regulatory restrictions and user training.
Step-by-step guide for inserting the disposable patient circuit.
Important warnings and notes for connecting the device to the patient.
Details technical alarms, their causes, and recommended actions.
Covers additional alarms, battery status, and cartridge types.
Describes temperature and gas supply related alarms and their causes.
Provides guidance on emissions, immunity, and separation distances.
To Next Page
