P-Setting Instruction
◆ Hold the MODE and Power buttons (3 seconds) to access the P-setting menu.
◆ Press the Power button to select the P-setting to adjust.
◆ Press the MODE button to adjust the value.
◆ To save settings, allow the LCD display to timeout (8 seconds) or long press MODE and Power buttons to exit the menu.
Accessing Settings
Setting Menu
· 16 ·
Setting Feature Notes
P1 LCD brightness 1: low
2: mid
3: high
Default: 3
P2 Speedometer units 0: kph
1: mph
Default: 0
To Next Page
Loading...
