Need help?Do you have a question about the Vauban Systems VERSO+ Series and is the answer not in the manual?
General| Category | Card Reader |
|---|---|
| Series | VERSO+ |
| Communication Protocol | Wiegand, OSDP, Clock & Data |
| Card Technology | 125 kHz: UNIQUE, Q5, EM4200, EM4102, AWID, HITAG 1/2/S 13.56 MHz: MIFARE Classic, MIFARE Plus, MIFARE Ultralight, MIFARE DESFire EV1/EV2/EV3, iCLASS, iCLASS SE/SR/Elite, NFC |
| Operating Frequency | 125 kHz & 13.56 MHz |
| Tamper Detection | Yes, via accelerometer |
| Ingress Protection | IP65 |
| Power Supply | 5-16 VDC |
| Interface | Screw terminals |
| Compatibility | Access control systems supporting Wiegand, OSDP, or Clock & Data protocols |
| Battery Life | N/A (Reader is powered externally) |
| Certifications | CE, FCC |
Product meets standards for electromagnetic radiation and susceptibility.
Guidelines for connecting peripherals as per NF EN 61000-4-4 Level 2.
Emphasizes professional installation to prevent electric shock or fire hazards.
Caution regarding capacitors in the 220V version due to potential charge retention.
Details power consumption, voltage, weight, dimensions, and operating temperature.
Covers weight, dimensions, operating temperature, and integrated 220V power.
Lists VISOR software versions and compatible modules (V-EXT4, V-EXT4+, V-EXTIO, V-EXTLCD).
Details device types supported by Wiegand, Clock&Data, and RS485 interfaces.
Covers cable requirements, maximum distances, and critical installation warnings.
Explains how to connect V-EXT4 modules using A and B terminals for an RS485 bus.
Provides information on conductors, distance, cable type, and placement warnings.
Illustrates the connection of power loss bolts and electromagnetic locks with diodes.
Emphasizes using anti-back-current diodes and following the diagram for all power supplies.
Shows the wiring for standard power-on door locks with anti-return diodes.
Stresses the use of anti-back-current diodes and adherence to wiring diagrams.
Step-by-step guide for configuring the unit's IP address using the VISOR software.
Table detailing software versions and dongle requirements based on reader count.
Instructions for installing the dongle on the unit with power off.
Guide to accessing the web server using IP address, login, and password.
Table outlining dongle needs for VERSO WEB software based on reader capacity.
Procedure to reset network settings, including fixed IP or DHCP configuration.
Procedure to clear the unit's memory by holding SW1 during power-on.
To Next Page