178 Vehicle care
■ Do not start the vehicle when it is
raised on the jack.
■ Clean wheel bolts and thread with
a clean cloth before mounting the
wheel.
9 Warning
Do not grease wheel bolt, wheel
nut and wheel nut cone.
1. Disengage wheel bolt caps with a
screwdriver and remove. Pull off
the wheel cover with the hook.
Vehicle tools 3 167.
Alloy wheels: Disengage wheel
bolt caps with a screwdriver and
remove. To protect the wheel,
place a soft cloth between the
screwdriver and the alloy wheel.
2. Install the wheel wrench ensuring
that it locates securely and loosen
each wheel bolt by half a turn.
3. Ensure the jack is correctly
positioned under the relevant
vehicle jacking point.
To Next Page
Loading...
