Storage 63
2. Pull the the strap under the seat
cushion and turn down the seat
cushion.
3. Put the release lever on top of the
rear backrest.
4. Fold the backrest forward and
down.
5. Put the safety belts for the
outboard seats into the belt
guides.
To return the backrest to the original
position, pull out the safety belt from
the belt guides and lift backrest up.
Push backrest firmly into place.
9 Warning
When folding up, ensure that
backrests are securely locked in
position before driving. Failure to
do so may result in personal injury
or damage to load or vehicle in the
event of heavy braking or collision.
Make sure the safety belts are not
pinched by the latch.
The centre rear safety belt may lock
when you raise the backrest. If this
happens, let the belt go back all the
way and repeat operation.
If the safety belt is still locked, turn
down the seat cushion and try again.
To return the rear seat cushion, put
the rear part of the seat cushion in its
original position ensuring that the
To Next Page
Loading...
