Keys, doors and windows 19
Operation with the button next to the
steering wheel
Press ? twice to open the tailgate.
Stop or change direction of
movement
To stop movement of the tailgate
immediately:
● press ? once on the
electronic key, or
● press the tailgate button under
the exterior tailgate moulding, or
● press C on the open tailgate,
or
● press ? next to the steering
wheel.
Pressing one of the switches again
will reverse the direction of
movement.
Memorising an opening height
To memorise a desired opening
height, move the tailgate to the
desired position and press one of the
following buttons for more than three
seconds:
● C in the open tailgate
● the button under the tailgate
moulding
The adjusted memorisation will be
confirmed by a chime. A new
memorisation cancels the previous
one.
Notice
Adjusting opening height should be
programmed at ground level.
Safety function
If the power tailgate encounters an
obstacle during opening or closing,
the direction of movement will
automatically be reversed slightly.
Multiple obstacles in one power cycle
will deactivate the function. In this
case, close or open the tailgate
manually.
The power tailgate has pinch sensors
on the side edges. If the sensors
detect obstacles between tailgate and
chassis, the tailgate will open, until it
is activated again or closed manually.
The safety function is indicated by a
warning chime.
Remove all obstacles before
resuming normal power operation.
If the vehicle is equipped with factory-
fitted towing equipment and a trailer
is electrically connected, the power
tailgate can only be opened with the
tailgate button or closed with C in
the open tailgate. Ensure that there
are no obstacles in the moving area.
Overload
If the power tailgate is repeatedly
operated at short intervals, the
function is disabled for some time.
Move tailgate manually into end
position to reset the system.
To Next Page
Loading...
