126 Driving and operating
Starting the engine
Vehicles with ignition switch
Turn key to position 1 to release the
steering wheel lock.
Manual transmission: operate clutch
and brake pedal.
Automatic transmission: operate
brake pedal.
Do not operate accelerator pedal.
Diesel engines: wait until control
indicator z extinguishes.
Turn key briefly to position 2 and
release after engine has been
started.
Manual transmission: during an
Autostop, the engine can be started
by depressing the clutch pedal
3 127.
Automatic transmission: during an
Autostop, the engine can be started
by releasing the brake pedal 3 127.
Vehicles with power button
● Manual transmission: select
neutral gear, operate clutch and
brake pedal.
● Automatic transmission: operate
brake pedal.
● Do not operate accelerator pedal.
● Press Start/Stop button.
● Release button after starting
procedure begins. Diesel engine
starts after control indicator z
for preheating extinguishes.
● Before restarting or to switch off
the engine when vehicle is
stationary, press Start/Stop once
more briefly.
To start the engine during an
Autostop:
● Manual transmission: during an
Autostop, the engine can be
started by depressing the clutch
pedal 3 127.
● Automatic transmission: during
an Autostop, the engine can be
started by releasing the brake
pedal 3 127.
Electric vehicles
● Depress brake pedal.
● Press Start/Stop button for
approx. two seconds.
● Keep the brake pedal depressed
until READY is displayed in the
Driver Information Centre and an
accoustic signal is given.
To Next Page
Loading...
