Vehicle care 233
3. Remove the electrical connection
cable (1) and air hose (2) from the
stowage compartments on the
underside of the compressor.
4. Open sealant bottle and lift the lid.
5. First, insert sealant bottle into the
compresor and align the triangle
symbols (1). Then, push down
sealant bottle and turn it to the
lock position (2).
6. Set the compressor near the tyre
in such a way that the sealant
bottle is upright.
7. Unscrew valve cap from defective
tyre.
8. Screw the filler hose to the tyre
valve.
9. The switch on the compressor
must be set to J.
10. Connect the compressor plug to
the power outlet or cigarette
lighter socket.
The tyre repair kit may only be
plugged in to the front 12 V power
outlet, in order to work properly.
To avoid discharging the vehicle
battery, we recommend to use the
tyre repair kit only when the
combustion engine is running or
when the electric engine is ready.
To Next Page
Loading...
