243Self-help, vehicle care
9. Ensure that the bulb holder seal is
positioned as illustrated. Fit the round
seal on the fastening bolt.
10. Insert bulb housing in vehicle body,
engaging ratchet and bolt in recesses.
Tighten attachment nuts by hand.
Engage plug connector. Close and lock
flap.
11. Carry out the following steps to ensure
proper function of the tail lights:
– Switch on ignition
– Operate brake
– Switch on parking lights
– Check all tail lights illuminate
appropriately, e.g. engage
reverse gear and check
reversing lights are
illuminated.
Ofrecido por www.electromanuales.com
To Next Page
Loading...
