118
Window demisting
W ind ow m ist in g e. g. du ring d amp w ea the r
or with damp clothing:
z Cooling n on.
z Set temperature switch as desired.
z Switch on fan at desired level of air flow
z Air distribution switch to V, air
recirculation system 4 switches off
automa tic ally,
– or –
if there is still moisture in the system after
previous air c onditioning operation, the
windows may mist up. To prevent this,
set air distribution to K before starting
engine and set to V approx. 5 sec onds
after starting.
z Activate heated rear window Ü.
Window de-icing
z Cooling n off.
z Set temperature switch as desired.
z Set fa n to desired speed ,
z Air distribution switch to V, air
recirculation system 4 automatic ally
switches off.
z Open side air vents.
z Activate heated rear window Ü.
Operation with cooling (AC comp ressor) is
not possible when outsid e temperatures
are low.
Air intake, air outlet, notes,
maintenance
see pages 124, 125.
Disregard of these instructions may
cause the windows to become misted up,
which can lead to accidents due to lack
of proper vision.
To Next Page
Loading...
