Vauxhall Corsa & Combo - Brake Lights, Rear Lights, Indicator Lights, Reversing Lights and Fog Tail Lights, Combo

20 9
4. Unscrew the four screws from the bulb
mounting using a screwdriver. Detach
the bulb mounting from the housing.
Lights from top to bottom:
Ind icator light
Brake light/Rear light
Reversing light
5. Remove bulb from socket.
6 . Ins e rt ne w bu lb (w ith o u t to uc hin g th e
glass), fit bulb m ounting into housing
and secure with screws. Engage cable
connector, insert b ulb housing in v ehicle
body with fixing p ins and secure with
scre ws.
Brake lights, rear lights,
indi cator l ights,
reversing lights and
fog tail lights,
Combo
1. Disengage cover by pressing retaining
lugs and remove.
2. Detach plug connector from bulb
mounting.
3. Grip the bulb housing from the outside,
slacken the two knurled nuts using the
wheel bolt key and unscrew by hand.
4. Detach bulb housing.