210
5. Press reta ining lugs on bulb m ounting
together and remove bulb mounting, as
shown in illustration.
Lights from top to bottom:
Reversing light/brake light
Ind icator light
Reversing light
Fog tail light
1)
6. Remove bulb from socket.
7. Insert new bulb, without touching the
glass. Engage bulb mounting in bulb
housing. Insert bulb housing into vehicle
body. Screw fixing nuts onto setsc rews
by hand and tighten. Engage plug
connector. Place cover in position and
close.
Number plate light
Corsa
1. Insert screwd river vertically on right-
hand side of bulb housing , exert pressure
towards the right and disengage spring.
Remove the bulb housing downwards.
2. Rotate bulb holder to left and
disengage.
1)
Model-specific version: fog tail light on right
only.
To Next Page
Loading...
