30
Z
Exhaust emission
The control indicator illumina tes when the
ignition is switched on and g oes out shortly
after the engine starts.
Illuminates when the engine is running
Fault in emission control system. The
permitted emission limits may be
exceeded. Consult a workshop. We
recommend your Vauxhall Authorised
Repairer.
If it flashes when the engine is running
Fault that can lead to destruction of
the c atalytic converter is indicated –
see page 147. Consult a workshop
immediately. We recomm end your
Vauxhall Authorised Repairer.
v
Airbag systems 3,
belt tensioners
see pages 81, 89.
1
Electronic ally controlled d riving
programmes for automatic
transmission 3
Control indica tor illuminates when sp orty
driving programme is enabled.
Further inform ation – see page 134.
T
Wi nt er program me for automatic
transmission 3 and Easytronic 3
Control indicator is illuminated when winter
prog ra m is enabled.
Further inform ation – see pages 128, 134.
I
Oil pressure
The control indicator illuminates when the
ignition is switched on and goes out shortly
after the eng ine starts. Can illuminate
intermittently when idling w ith hot engine;
must go out when engine speed is
increa sed.
Illuminates when the eng ine is running
Eng ine lubrication m ay be interrup ted. This
ma y result in damage to the eng ine and/or
locking of the drive wheels:
1. Depress clutch.
2. Move gear shift lever to neutral; with
autom atic transmission 3 and
Easytronic 3 m ov e selector lev er to N .
3. Move out of the flow of traffic a s quickly
as possible without impeding other
vehicles.
4. Switching the ignition off (Position I).
Consult a workshop. We recommend your
Vauxhall Authorised Repairer.
When the ignition is off, considerab ly
more force is ne ede d to brak e and ste er.
Do not remove key until vehicle has
come to a stand still, otherwise the
steering column lock could engage
un e xpe ctedly .
To Next Page
Loading...
