46
The information of the two trip computers
can be reset separately, thus making it
possible to evaluate data over different
periods of time.
Select the desired trip computer
inform ation.
The value for the selected function will b e
reset and recalculated.
To reset all information of a trip computer,
select menu item All v alues.
After resetting, "- - -" is d isplayed with the
trip computer information selected. The
recalculated values are displayed after a
brief delay.
Interruption of power supply
If the power supply has been interrupted or
if the battery voltage ha s dropped too low,
the values stored in the trip computer w ill
be lost.
To Next Page
Loading...
