166 Climate control
Press MENU .
Touch OPTIONS.
Select =.
Touch + to define a new timer.
Touch --:--.
Enter time and day.
Press A to confirm the settings.
Press ON to activate the timer.
To delete a timer, press f at the top
of the Info Display and delete the
desired timer.
Confirm the deletion.
The heating / ventilation procedure
starts approx. 45 minutes before the
programmed time, and is maintained
ten minutes after it.
Air vents
Adjustable air vents
Centre air vents in the instrument
panel
Direct the flow of air by tilting and
swivelling the slats.
To close the vent, swivel the slats
inwards.
To Next Page
Loading...
