Lighting 85
High beam assist switches
automatically to low beam when:
● Driving in urban areas.
● Camera detects heavy fog.
● Rear fog light is switched on.
● Oncoming or preceding vehicles
are detected by the camera.
If there are no restrictions detected,
the system switches back to high
beam.
Deactivation
The system can be deactivated via
the vehicle settings menu in the Info
Display.
On vehicles equipped with the Radio
infotainment system, it is not possible
to alterate the high beam assist
settings.
Info Display 3 77.
Headlight flash
Pull to activate the headlight flash.
Headlight range adjustment
To adapt headlight range to the
vehicle load to prevent dazzling, turn
thumb wheel X to required position.
ICE
0 : front seats occupied
1 : all seats occupied
2 : all seats occupied and load
compartment laden
3 : driver's seat occupied and load
compartment laden
To Next Page
Loading...
