Vehicle care 165
2. Remove the bulb socket by
pulling.
3. Remove the bulb from the bulb
socket and replace the bulb.
4. When fitting a new bulb, engage
the lugs in the recesses on the
reflector.
5. Reinstall the headlight assembly.
6. Place headlight protective cover
in position and close.
Fog lights
Have bulbs replaced by a workshop.
Front turn signal lights
1. Rotate bulb holder
counterclockwise and disengage.
2. Push bulb into socket slightly,
rotate counterclockwise, remove
and renew bulb.
3. Insert bulb holder in reflector,
rotate clockwise to engage.
Tail lights
Left-hand side
1. Remove both covers and unscrew
screws. Remove the panel.
To Next Page
Loading...
