Vauxhall Mokka 2021 - Page 149

● No people or animals may be in the
vehicle when it is jacked up.
● Never crawl under a jacked-up vehicle.
● Do not start the vehicle when it is
raised on the jack.
● Before screwing in the wheel bolts,
clean them.
Warning
Do not grease wheel bolts.
Warning
Ensure to use always the correct wheel
bolts if changing the wheels. When
installing the spare wheel for temporary
usage, the bolts for alloy wheel rims
can also be used.
● Note that the spare wheel is secured
by the conical contact of each bolt if
the wheel bolts for the alloy wheel rims
are used. In this case, the washers do
not come into contact with the spare
wheel.
1.
Disengage wheel bolt caps with the
wheel bolt cover remover.
Vehicle tools ð
page 145.
Steel wheel rims with cover: Pull off
the wheel cover.
2.
Attach the wheel wrench and loosen
each wheel bolt by half a turn.
The wheels might be protected by
locking wheel nuts. To loosen these
specific nuts, first attach the adapter
onto the head of the nut before
installing the wheel wrench. The
adapter is located in the tool bag.
The wheels might be protected by
locking wheel nuts. To loosen these
specific nuts, first attach the adapter
onto the head of the nut before
installing the wheel wrench. The
adapter is located in the tool bag ð
page 145.
3. Ensure the jack is correctly
positioned under the relevant
vehicle jacking point.
In case of emergency
147