Taking care of your machine
Cleaning the pre-motor lter
Switch o the machine
and pull the plug from the
mains socket. Press the dirt
container release button to
remove the dirt container.
Remove the pre-motor lter
from the lter holder.
Remove the lter holder
containing the pre-motor
lter.
Insert the pre-motor lter
into the lter holder and
place the lter holder back
on to the machine. Push the
dirt container rmly until it
clicks into place.
Clean the pre-motor lter
thoroughly under running
water and leave it to
dry completely at room
temperature for at least
24 hours.
!
40˚C
MAX
24hr
To Next Page
Loading...
