Taking care of your machine
Post-motor lter maintenance
Press both tabs to release
the post-motor lter cover
and ip the lter cover
away towards the rear.
Carefuly clean the lter with
a soft brush
Remove the lter by pulling
on the catch. Carefully
tap the lter over a bin to
remove dirt and debris.
IMPORTANT: The post-motor lter is designed to oer long life with no maintenance. The lter should be checked
periodically and when heavily discoloured it should be replaced. Please do not wash, scrub or brush the lter as
this will damage the delicate lter media.
Storing your machine
TIP
Clean the pre-motor
lter every time
the dirt container is
emptied and replace
the post-motor lter
every 12 months.
Switch o the machine and
pull the plug from the mains
socket. Push the cord rewind
button until the power cord
has been fully retracted.
Store the telescopic handle
with the oorhead connected
in the docking bracket on the
back of the machine.
Replace the post-motor lter
by lining up the tabs on the
bottom of the machine. Push
until it clicks into place.
To Next Page
Loading...
