Vax AP01 - Operating Your Machine; Control Panel Operations; Machine Maintenance and Filter Replacement; Filter Replacement Procedure

54
Using your machine:
Press on/o control
to switch on/o.
Press fan control. The
fan speed indicator light
will illuminate displaying
selected speed.
L = Low (Silence
Techn o lo gy
®
)
M = Medium
H = High
Press timer control. The
timer light will illuminate
showing time selected:
2 hours, 4 hours or 8
hours.
The air purier will turn
o once the selected
time has completed.
WARNING
The air purier will continuously run
when all indicator lights are o
• IMPORTANT •
The control panel is touch sensitive,
lightly press controls.
!!
Taking care of your machine: replacing the lters
CAUTION
To reduce the risk of
injury from moving
parts - unplug
before servicing.
!
!
!
!
• IMPORTANT •
Unplug and switch
o the air purier
before performing
maintenance or
troubleshooting checks.
TIP: The lters will
need replacing more
often when using
the air purier in
smoke lled or dusty
environments.
When the lter light is
illuminated, turn the
unit o and unplug it
from the power outlet.
Press buttons on
sides of unit to
release front cover.
Rotate top down
and remove.
Air ow arrow
Lift and remove the used lter.
Note: the odour lter is attached
with hook and loop closure to the
main lter. The odour lter* is
an optional feature. The unit will
continue to clean the air without it.
Line up odour lter,
(the odour lter
is reversible and
can be tted either
side) press onto the
Velcro tabs to attach
to main lter.
Re-t main lter into
air purier following
the direction of the
air ow arrow.
Line up tabs on
lter cover.
Lower until it
clicks into place
on both sides.
Replace your main lter every 6 months and your odour lter every 3 months.
WARNING
DO NOT WASH FILTERS.
Tabs
1 2
3 4
5
6 7
FRONT