Vax Rapide V-025 User Manual

Fill the measuring cap 3 times with
VAX AAA carpet cleaning solution
and pour into the reservoir.
Note: The cleaning solution supplied
with your machine is VAX AAA Carpet
Cleaner.
When replenishing this item, please
use VAX Carpet Cleaner which is
available in 1 litre bottles from your
VAX stockist or any VAX branch office.
Fill the remaining space in the
solution reservoir with tap water.
Replace the measuring cap.
Note: use only VAX AAA cleaning
solution or VAX Carpet Cleaner. Using
other cleaning solutions may result in
excessive foaming. This may cause
the float to shut off the cleaner
prematurely.
Using other cleaners will void your
warranty.
Place the bottom of the solution
reservoir into the cleaner and push
into place. There will be an audible
click when the reservoir is in the
correct position.
How to operate your cleaner
6
Switch off the mains power and
unplug carpet washer. Remove the
water tank.
Flip the cleaner on it’s side to
expose the nozzle base.
To remove the belt cover, use a
phillips screwdriver to remove the
two screws.
Grasp the belt cover near the belt
roll and lift out.
Belt or brush removal and replacement
Phillips screwdriver required
The plug must be removed from socket outlet before cleaning or maintaining the appliance.
11
Rapide V-025 Manual 4/2/08 10:15 AM Page 6

Vax Rapide V-025 Specifications

General

Brand	Vax
Model	Rapide V-025
Category	Washer
Language	English