Vax Careline: AU: 1300 361 505
NZ: 0800 800 900
vax.com.au 6
Operation
Assembling your multifunction cleaner (carpet washing)
Add 40ml of Vax solution per 1 litre of water,
unless otherwise stated on the bottle.
Press down on clips
to secure.
Remove solution tube from under
side of motor housing.
Attach solution tube and
twist into position.
Attach the solution tube to
the wash head at the
connection point.
Remove lter housing. Remove dust bag.
Fill clean water tank with
warm water (max 40º C).
Insert hose and
twist clockwise.
Insert clean water tank.
Ensure the solution tube is
wrapped loosely around
the hose and extension
tube. Secure in place with
the clips provided.
To Next Page
Loading...
Need help?
General
