1. Only use screws for installation on wood surfaces.
2. Use bolts or studs if dartboard is to be installed on a concrete wall.
！
Installation Place Of Dartboard
Dartboard Installation
VDarts H3/H4/H4L Global Online Dartboard
Dartboard Installation
173CM
244CM
Dartboard
Throw Line
Height
keep the center of the dartboard
(bull)173cm above the floor
1.Prepare four screws
2.Fasten the screws by putting their parts into the holes
3.Make sure the distance is 173cm between the dartboard
centre and the floor.
4.Keep screw heads 5mm out of the wall.
5.Make sure the wooden screws are fastened properly by
shaking them lightly.
Distance
Set the throw line (point where darts are thrown)
244cm from the surface of the dartboard.
Wall
Dartboard
Nail Holes
6
To Next Page
Loading...
